Canbus Flow Sensor - Fire & Rescue

Highlights
• Electromagnetic principle - No moving parts
• Canbus enabled
• Plug and play - connect to any pump controller
• Enables informed decisions
• 98% accurate
• Measures all firefighting flow rates
• Improves safety
• Can be installed on all pressurised water hose reels used on fire appliance
• No ghost readings
• Not affected by debris in water
• No breakdowns as no moving mechanical parts

Model EMF-300 flow sensor with CanBus interface to J-1939

All the benefits of a standard fire service electromagnetic flow meter with a CanBus interface, but adapted for connection to a pump controller.

ALL TSI FLOW METERS FEATURE ELECTROMAGNETIC TECHNOLOGY. THE PROVEN TECHNOLOGY FOR FIRE SERVICES.

Not affected by turbulence in the water – can be installed directly onto pump manifold

No mechanical parts in water stream – not affected by any debris in the water and causes no pressure loss

Wide dynamic range – can measure the full range of fire-fighting flow rates with good accuracy

High reliability

Good accuracy. ±2% of measuring range (30 ~ 3,000 lpm)

Excellent Repeatability

Model No. 33-1011
General Range: 30 – 3,000 lpm
Resolution:   50 – 750 lpm: ± 15 lpm
> 750 lpm: ±2%
Supply Voltage: DC 8V ~ 32V 

Negative Chassis Earth.
Supply Current: 0.35A
Operating Temp: -10 to +50ºC
Standard Functions:
Flow reading.

SENSOR

Measurement Principle: Electromagnetic

Signal Output: CanBus to J1939 format

Casing Material: JIS ADC6, marine grade aluminium, hard anodized.
Pressure rating: 49 bar
Protection level: IP65
Inner pipe diameter: 60 mm
Dimensions: Ø140 x 210 x 100 mm
Weight: 3.0kg
Adaptor: Matched to pipework. Contact TSI